ENG

ȸ»ç¼Ò°³

5G

5G AMP

  • 5G PAU for 5G NR Repeater system
  • AMP and LNA integrated
  • DPD linearization
Tx
Input / Output frequency 3600MHz ~ 3800MHz @ BW 200MHz / Fc : 3700MHz
Input Level -20.0 ¡¾1.0dBm/total (5G NR 100/140/160/180/200MHz)
Output Power 50Watts average Max. (5G NR 100/140/160/180/200MHz, Po= +47dBm)
RF Gain 67dB¡¾1dB
ACLR -30dBc min @ ¡¾ Carrier BW / DPD OFF
-47dBc min @ ¡¾ Carrier BW / DPD ON
Gain Flatness Peak to peak 1.0 dB Over operating frequency(Room temp.)
VSWR 1.4 : 1 / Input
1.3 : 1 / Output
Rx
Input / Output frequency 3600MHz ~ 3800MHz @ BW 200MHz / Fc : 3700MHz
Input Level -48dBm/total, -28dBm/Max. (ALC atten 20dB activated)
Output level -10dBm/total
RF Gain 38dB¡¾0.5dB
Noise figure 2dB(Room temp.) / 2.3dB(Environ.)
VSWR 1.3 : 1 / Input
1.5 : 1 / Output
IP3 25dBm
EVM Under 1% (compare to source) @-10dBm/total(Max), 256QAM
Others
Switching Duration Below 1us
Operating Temperature -40¡É to +75 ¡É
Storage Temperature -40¡É to +85 ¡É
Relative Humidity 0 to 95 % RH (non-condensing)
Practical Use 5G NR
Cooling External Heat-Sink
Physical Dimension 90mm * 210mm * 40mm

5G FILTER

Frequency Range 3600MHz ~ 3800MHz
Insertion Loss (Max.) 0.6dB
Return Loss (Min.) 20.0dB
Ripple (Max.) 0.4dB (Peak to Peak)
PIMD 3rd: 150dBc, @ 20Watt/2Tone Output
Temp. -40 ¡­ +75¡É(Humid. 95%)